Pump Test Unit
To complete a well and measure its discharge and drawdown with a mechanised pump can involve using some really unwieldy equipment that is difficult to transport and use in remote sites.
PAT Pump Test Unit is a compact and easily transported unit comprising of a roller unit to feed the lay flat site pipe into the hole and support it on rigid support pipe on the surface.
The operation of lowering the pump takes no more than a few minutes.
Related Products
-
PDC Drill Bits
PDC Drill Bits (Polycrystalline Diamond Compact Bit)
A PDC insert is a tough man-made material that equals the hardness of a natural diamond and is three
times the hardness of tungsten carbide. This allows it to maintain a durable, sharp edge that, when rotating and pushed into a rock formation with modest weight on drill bits – particularly when compared to tricone rock roller bits, the PDC will continually scrape at the surface to cut material
PDC bits can be used with drill mud circulation in unstable water
saturated formations on with compressed air if the formation is stable
Download PDF -
Foam injection pump
Foam injection pump is a high pressure pump to facilitate drilling operations when using compressed air soft through to hard rock formations.
The pump is also useful for cleaning drilling rig and ancillary equipment.
-
Air Compressors
The best method to drill an open hole in consolidated rock is to use as Down-the- Hole Hammer striking a hard tungsten tipped button bit. DTH hammers are powered by compressed air that pick and drive the heavy steel piston onto the drill bit to percussively break and pulverise the very hardest rock – the discharging air passes through the drill bit and lifts the rock debris to surface.